Ballistic protection soldiers can actually wear - Tallinna Tehnikakõrgkool

News

Ballistic protection soldiers can actually wear

16. November 2026

Ballistic protection soldiers can actually wear

A dismounted soldier carries body armour, a weapon, communications equipment and other gear at once, often in challenging conditions such as extreme heat, cold or rough terrain. Every additional kilogram can slow movement and increase physical strain, potentially putting the soldier at greater risk. How can body armour provide effective protection without overloading its wearer?

In the sixth webinar of the ECPC 2027 series, organised by TTK University of Applied Sciences, Gilda Santos, Protection and Defence Area Manager at CITEVE, the Portuguese Technological Centre for the Textile and Clothing Industries, presented how the VESTLIFE project addressed this challenge.

The webinar series forms part of the programme leading up to the 12th European Conference on Protective Clothing (ECPC2027), which will take place at TTK University of Applied Sciences in May 2027.

Three guiding principles

According to Santos, the development of the VESTLIFE body armour system was based on three key principles. First, protection must be wearable: ballistic performance is essential, but so are weight, fit and freedom of movement. Second, end users must be involved in the design process. Third, test results need to be interpreted in context, as user feedback, thermal comfort indices and physiological measurements each provide different insights.

Protection is non-negotiable, but it must be balanced with mobility and comfort.

CITEVE’s development process moves from defining requirements to developing concepts, followed by laboratory testing, wearer trials and industrial implementation. As Santos emphasised, integration is what makes the difference: without every stage, research risks never making the transition into industry.

One system, multiple missions

The VESTLIFE project set out to develop a modular, lightweight and ergonomic body armour system for dismounted soldiers, incorporating CBRN detection capabilities. Its guiding principle was to provide the necessary level of protection without unnecessarily compromising mobility.

The vest combines mandatory and optional components:

  • Mandatory components: front and back carriers with ballistic protection.
  • Optional components: detachable neck protection, deltoid and upper-arm protection, lower-back and groin protection, and an auxiliary pouch.
  • Detection capabilities: provision for integrating CBRN detectors into the vest’s attachment system.

This modular approach allows the vest to be configured according to the mission rather than always carrying the maximum possible level of protection.

From digital avatars to physical prototypes

The design process began with 3D body scans of Portuguese Army personnel, which were used to create male and female digital avatars. Hard ballistic plates were then designed on these avatars, with their fit initially assessed using 3D-printed models. Inexpensive PLA was used for the first models before being replaced with more durable polycarbonate for field exercises. This approach helped save both time and costly protective materials.

The materials used included aramid, ultra-high-molecular-weight polyethylene (UHMWPE) and glass fibres, ceramics and resins. Manufacturing and assembly processes involved laser cutting, encapsulation of soft ballistic materials, mechanical joining and adhesive bonding.

Santos stressed that materials can only deliver their intended level of protection when properly integrated. The vest must therefore be considered as part of a complete equipment system, alongside the helmet, communications equipment and other gear, rather than as a standalone piece of personal protective equipment.

Soldiers’ feedback led to two vest designs

Development progressed through several prototypes, from low-cost mock-ups to a third proof of concept. At every stage, soldiers provided feedback, first during indoor evaluations and later in field trials. They assessed various aspects of the design, including neck and shoulder interfaces, pouch accessibility, belts and closures, and freedom of movement.

The initial aim was to develop a single vest. However, feedback from soldiers led to two configurations: the fully modular Standard vest and the more compact Slim vest, designed to minimise bulk and prioritise mobility.

As the soldiers pointed out, in some situations the main priority is simply to move as quickly as possible. Santos emphasised that a development cycle is only complete once proposed changes have been validated, and that testing should involve as many end users as possible.

Four complementary lines of evidence

The performance of the vests was assessed through four different types of testing, each providing a distinct perspective.

  • Thermal manikin tests: A 34-zone sweating thermal manikin was used in a climatic chamber to assess performance under three environmental conditions and at three different activity levels. The comfort indices were negative during intense activity in both the hot and temperate conditions.
  • Wearer trials: Ten soldiers (nine men and one woman) performed nine standardised movements while wearing three different configurations: a reference vest, the Standard vest and the Slim vest. The Slim vest received the highest proportion of excellent and good ratings.
  • Field trials: Nine volunteers completed three testing stations at a military training area. They assessed six functional aspects of the vests, while heart rate, skin temperature and perceived exertion (measured using the Borg scale) were also recorded. The Slim vest received the highest ratings for flexibility, volume, weight, agility, speed and mobility.
  • Physiological tests: The Portuguese Army’s Military Readiness Laboratory conducted treadmill tests at 4, 6 and 8 km/h, military task simulations and a vertical jump test. The results were mixed: no statistically significant differences were found in metabolic cost or heart rate, while the Slim vest performed better than the Standard vest in terms of jump height.

Santos highlighted that a positive result in one measurement does not necessarily translate into a positive result across all other measures. Different testing methods answer different questions and should therefore be interpreted separately.

Looking ahead: eco-design

Further trials should involve larger and more diverse groups of wearers to validate the findings. The follow-up European Defence Fund project ECOBALIFE builds on this work, extending the research to eco-designed personal and platform protection systems.

As Santos noted, protection is non-negotiable, while sustainability is a responsibility. This means considering the entire product life cycle from the outset, including material selection, maintenance, repair and end-of-life solutions.

Key takeaways

The VESTLIFE project demonstrated that effective ballistic protection must go hand in hand with comfort, fit and freedom of movement. A modular design allows the level of protection to be adapted to different missions, while digital tools such as 3D body scanning, avatars and 3D printing help accelerate the development process and improve fit for both men and women.

Crucially, involving soldiers throughout the design process led to two vest configurations, with the more compact Slim vest receiving the highest ratings in wearer and field trials. The testing also highlighted that no single measurement can provide a complete picture of performance – different methods reveal different aspects and must be interpreted in context.


The webinar is available to watch in full HERE.

The next webinar in the series Transitioning to non-PFAS PPE in the Fire Service will take place on November 20, 2026. Speaker of the webinar is Bryan Ormond, webinar is moderated by Professor Ada Traumann. Register for the webinar HERE.

Learn more about the ECPC2027 conference and the webinar series: https://ecpc2027.ee and ECPC LinkedIn.

Paula Veske-Lepp
Visiting Professor

News
& press